Draft EN 1332-4
Identification Card Systems - Man-Machine Interface - Part 4 : Coding of user requirements for people with special needs.
This draft European Standard is submitted to the CEN members for CEN enquiry.
It has been drawn up by Technical Committee CEN/TC 224.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standard bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
European Committee for Standardization
Comité Européen de Normalisation
Europäisches Komitee für Normung
Central Secretariat : rue de Stassart 36, B-1050 Brussels
This European Standard has been prepared by Technical Committee CEN/TC 224 "Machine-readable cards, related device interfaces and operations", the Secretariat of which is held by AFNOR.
This document is currently submitted to the CEN enquiry.
This document is a major revision of the previous version EN 1332-4:1997. The number of tags has been increased from 17 to 42. The grouping of preferences has been reorganised to make it more intuitive and notes have been added to draw attention to possible incompatible tag settings.
This European Standard is one of a series of standards, under the general title "Identification card systems - Man-machine interface" and the different parts are the following :
- Part 1 : Design principles for the user interface
- Part 2 : Dimensions and location of a tactile identifier for ID-1 cards
- Part 3 : Key-pads
- Part 4 : Coding of user requirements for people with special needs
- Part 5: Raised tactile symbols for differentiation of application
on ID-1 cards
In addition there is a Technical Specification on Guidance on Design for Accessible Card Activated Devices
Machine readable cards facilitate the provision of a growing variety of services across Europe. The purpose of EN 1332 is to increase the accessibility of these services for the benefit of consumers. This will be achieved by facilitating the inter-sector and cross-border interpretability of machine readable cards and to do so with the maximum possible degree of user-friendliness.
EN 1332 addresses the needs of all users, including people with special needs, for example the aged, minors, the disabled, the visually impaired, those with learning difficulties, first time users, those not conversant with the local language.
EN 1332 specifies:
a) the design principles for the user interface (including symbols) to be incorporated into design of card operated equipment, but not the machine operations associated with the selection and delivery of goods or services;
b) a tactile identifier to be incorporated into the design of machine readable cards;
c) a standard layout for the keypads of card operated equipment;
d) coding of user requirements for people with special needs;
e) tactile markings for differentiating cards by application.
The contents of EN 1332 are generically based, not sector specific, and cover card operated equipment. It is recognised that the equipment can also be operated by other means, such as the insertion of notes and coins, but the scope of this standard has been, as indicated, narrowly defined.
The objective of establishing a standard on the coding of user requirements
for people with special needs is to enable cardholders, in particular
elderly and disabled people, to make better use of cardholder operated
equipment accepting integrated circuit(s) cards (e.g. cash dispenser,
ticket machine, vending machine), which is becoming more and more widespread
in Europe. This also enables service providers to ensure that their equipment,
and the services provided, can be made responsive to individual cardholder
Current standards for some specific industry sectors, for example finance or healthcare, which include handling of sensitive information may not include user preference data. If issuers of cards in thse sectors wish to make use of the tags specified in EN 1442-4 they should consider placing this information on the card in a seperate dataset or in separate media.
This European Standard defines the data objects to be stored within an integrated circuit(s) card and exchanged in order to enable integrated circuit(s) card accepting terminals to identify specific user interface preferences. The preference information may be used by terminals to configure appropriate methods of communicating with the user during a transaction process.
The European Standard also specifies a mechanism for the retrieval of the user preference information from an integrated circuit(s) card and for the combination of data objects to form particular user profiles, through the assignment of unique tags.
Formats and detailed definitions of single data objects are specified, however, the exact method of storage of data within the integrated circuit(s) card is outside the scope of this European Standard.
This European Standard is applicable to the scenario where the cardholder operates the card accepting equipment (e.g. a cash dispenser, ticket machine, vending machine) and to integrated circuit(s) cards conforming to ISO/IEC 7816-4:2005 and ISO/IEC 7816-6:2004 and personalised to the individual cardholder.
This European Standard incorporates, by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies.
ISO/IEC 7816-4, Identification cards - Integrated circuit(s) cards with contacts - Part 4 : Organisation, security and commands for interchange (ISO/IEC 7816-4:2005)
ISO/IEC 7816-6, Identification cards - Integrated circuit(s) cards with contacts - Part 6 : Interindustry data elements for interchange (ISO/IEC 7816-6:2004).
ISO 639, Code for the representation of names of languages.
ISO/IEC 8825, Information technology - Open Systems Interconnection - Specification for Basic Encoding Rules for Abstract Syntax Notation One (ASN.1).
For the purposes of this standard, the following definitions apply :
3.1 data element : See ISO/IEC 7816-4
3.2 data object : See ISO/IEC 7816-4
3.3 primitive/constructed data objects : See ISO/IEC 8825
3.4 template : See EN ISO/IEC 7816-6
|ASN.1||Abstract Syntax Notation One|
|b8.b1||Bits one to eight of a byte (Isb)|
|BCD||Binary Coded Decimal|
|ls||Least significant byte|
|ms||Most significant byte|
|PIN||Personal Identification Number|
|TLV||Tag, length, value|
Last updated: 20.11.2009 © Copyright reserved Website design: Digital Accessibility Team